|
If the hooks are badly rusted, however, they should be replaced with new ones. When doing this it is important to use the same size and weight as the old ones in order that the action of the plug is not changed in any way. It's always a good idea to check the points and barbs of old or new hooks to make sure they are sharp and not bent or broken. A few minutes spent with a small file or carborundum sharpening stone will pay dividends later on when a fish with a tough mouth strikes and is hooked. Wood or cork spin bugs should be checked to see if the hair or feathers are in good shape and are not thinned out or chewed up too much. If this is the case the best idea is to remove the old hair and add new material. After the hair or feathers have been tied or glued on, the bug can be repainted with enamel or lacquer using a small brush. Spoons and spinners should be wiped dry after using to prevent them from tarnishing or corroding. If they were used in salt water, it's a good idea to rinse them in fresh water, then wipe them dry before storing them away. You can also wipe the spoon, hooks, and connections with an oily rag to keep them in good condition. If the spoons or spinners are tarnished they can usually be polished if you rub them with a metal polish.
|
